Q: What is the power source of the Hofmann Duolift GTE 2500? A: The Hofmann Duolift GTE 2500 is powered by a 230V, 50Hz, 1-phase electrical source.
Check workshop breaker; reset thermal relay inside the control box.
Check for any visible malfunctions, loose nuts, or damaged cables before use.
To ensure safe and efficient operation, it's essential to follow the guidelines outlined in the Hofmann Duolift GTE 2500 manual. Here are some key operating instructions: hofmann duolift gte 2500 manual
Hofmann Service Center [Phone number] [Email address] [Website]
Raise the vehicle roughly 15 cm off the ground. Give the bumper a gentle push to verify the vehicle is balanced and stable.
Always position the vehicle so its center of gravity lies squarely between the two columns. Mistargeting the center of gravity can cause structural flexing or vehicle slippage. Q: What is the power source of the Hofmann Duolift GTE 2500
Regular maintenance is essential to prevent jamming and premature wear of the screw mechanism.
3-Phase / 400V / 50Hz (Standard European workshop configuration) 2. Installation and Floor Requirements
The floor must be perfectly level within a tolerance of across the footprint of both columns. Anchoring Systems Check for any visible malfunctions, loose nuts, or
The Hofmann Duolift GTE 2500 is a high-quality, versatile, and reliable vehicle lift designed for a wide range of automotive applications. With its robust construction, advanced safety features, and user-friendly design, this lift has become a popular choice among mechanics, repair shops, and car enthusiasts.
Safety features include mechanical arm locks and lifting nuts with a very large contact surface. The (Support nut) bear the total load during lifting and lowering, providing critical redundancy. The Automatic Arm Locks secure the lifting arms in position. The Bottom Stops on each column provide a failsafe to prevent the carriage from traveling beyond its safe limit. Before every operation, always ensure the area is clear of personnel, avoid exceeding the 2500kg rated load, never stay in a vehicle while it is being lifted, always use the mechanical locks before working underneath, and never operate a damaged or malfunctioning lift.
Ensure the lift bay is clear of tools, debris, and bystanders.
Inspect the chain guide integrated into the base frame for wear, as highlighted in the safety documentation.