Huawei Atn 910d-a Datasheet ❲Real • Series❳

Static routes, RIP, OSPFv2/v3, IS-ISv4/v6, and BGP/BGP4+. Multicast: PIM-SM, PIM-SSM, IGMP v1/v2/v3, and MLD v1/v2. MPLS and Segment Routing (SR) Traditional MPLS: LDP, RSVP-TE, VLL, VPLS, and L3VPN.

To maintain carrier-grade network availability (99.999%), the ATN 910D-A includes comprehensive hardware and software protection mechanisms. Device-Level Protection

Transporting 2G/3G/4G/5G traffic from base stations to the core network. VIP Private Lines:

: Uses FlexE technology to provide hardware-level isolation for different services, ensuring that mission-critical private line traffic is not affected by other data flows. Huawei Atn 910d-a Datasheet

BGP4, OSPFv2/v3, IS-ISv4/v6, RIPv1/v2, and static routing.

to divide physical ports into multiple isolated slices. This allows carriers to allocate dedicated bandwidth for specific services (e.g., mission-critical VIP lines vs. standard data) without interference. High-Precision Synchronization: Fully supports

Integrates with Huawei’s iMaster NCE (Network Cloud Engine) for end-to-end service lifecycle automation, zero-touch provisioning (ZTP), and AI-driven fault isolation. Environmental and Compliance Standards Static routes, RIP, OSPFv2/v3, IS-ISv4/v6, and BGP/BGP4+

Do you require a comparison with other models like the ? Share public link

In-situ Flow Information Telemetry (iFIT) for real-time, per-packet loss and latency measurements. Target Applications 1. 5G Mobile Backhaul (CSG)

The ATN 910D-A is built for large-scale deployment of access devices, particularly in 5G and FMC (Fixed-Mobile Convergence) scenarios. System Capacity : It offers a high system capacity of up to To maintain carrier-grade network availability (99

Simplifies network protocols by replacing complex LDP/RSVP-TE setups. It uses source routing to optimize traffic paths across the metro network.

44.4 mm × 442 mm × 220 mm (1U Height, 19-inch standard width)

| Port Type | Quantity | Interface | Description | | :--- | :--- | :--- | :--- | | | 4 | QSFP28 | For high-speed uplink to aggregation/core network. Can operate at 100GE or 50GE. | | 25GE/10GE/GE/FE Ports | 16 | SFP28 | High-density, multi-rate ports supporting 25GE, 10GE, Gigabit Ethernet, or Fast Ethernet. | | 10GE/GE/FE Ports | 8 | SFP+ | For legacy and lower-rate service connections, supporting 10GE, Gigabit Ethernet, or Fast Ethernet. |