Skope Heated Towel Rail Timer Instructions !!exclusive!!

Press again. The screen will display 1 OFF , indicating the shutdown time for your first schedule.

: Press and hold the CLOCK button. While holding it, use the HOUR , MIN (minutes), and DAY keys to adjust to the current settings. Save : Release the CLOCK button to store the data. Programming a Heating Schedule

To ensure your programs run at the correct times, you must calibrate the internal clock. Press and hold the (or Time ) button.

Before programming, identify your specific controller type from the descriptions below. 1. Standard 24/7 Digital Programmable Timer Instructions skope heated towel rail timer instructions

This article focuses on the , as it is the most requested for instructions.

Use the + or - buttons to select the current day. Press Set/Clock to confirm.

: If the timer is unresponsive, use a pin to press the small Access Time Settings : Press and hold the button (or ) until the year begins to flash. Adjust Values Boost/Advance arrows to set the year, then press to confirm and move to the month and day. Set Hours/Minutes Press again

Many Skope wall-mounted heaters and towel rails include a built-in countdown mode. This is ideal for drying towels after a shower without leaving the unit on all day.

Press and hold the Clock/Set button for 3 seconds until the day flashes.

Whether you have just unboxed a new Skope rail or have lost the original manual, this guide provides . We will cover everything from basic button functions to advanced weekly programming and troubleshooting. While holding it, use the HOUR , MIN

Most models support up to 7 or 14 distinct "ON/OFF" events. A standard morning and evening routine requires two events.

Press the PROG (or SET ) button once. The screen will display 1 ON , indicating your first turn-on time.

button to switch from "Auto" to manual on/off control, bypassing the programmed schedule. Holiday Mode

Skope heated towel rails are often paired with external timers like the Heirloom Timekeeper Plus

For a quick burst of heat without changing your schedule, use the button: