I Download !!top!! Fixed Driver Cutting Plotter Jinka 1351 Page
Right-click any "USB Serial Port" or "Plotter Controller" and select , ensuring you check "Delete the driver software for this device". Reboot : Restart your computer after removal. 3. Install the "Fixed" Driver
These are often bundled with Jinka machines and include built-in calibration tools for the 1351. SignCut Pro: Offers a dedicated support page for Jinka Driver Integration
If you purchased your plotter recently, check the included CD or USB drive for this software. It's designed to eliminate the complexity of setting up third-party cutting software.
For a "fixed" installation that avoids common errors, follow this procedure:
: During the setup, choosing "Manual Setup" instead of "Auto-Detect" is often more reliable. It is recommended to assign the plotter to i download fixed driver cutting plotter jinka 1351
If you are using a physical adapter cable, download the Prolific PL2303 legacy driver (Version 3.3.2 or older fixes the "Code 10" error on Windows 10 and 11). Step 3: Install the Driver Safely Disconnect the Jinka 1351 USB cable from your computer. Extract the downloaded .zip folder to your desktop.
to avoid conflicts with other USB devices or Bluetooth adapters. Verification : After installation, open the Device Manager and check under Ports (COM & LPT)
Establishing a functional connection for a cutting plotter depends heavily on matching the specific hardware variant—such as the standard or the
: The 1351 is compatible with major design software including CorelDraw , Adobe Illustrator , and Artcut . Specialized plug-ins like PlotCalc for JinKa allow for direct output from CorelDraw. Right-click any "USB Serial Port" or "Plotter Controller"
Connect the USB cable and turn on the plotter only after the driver installation prompts you. 3. Port & Communication Fixes
You should see . Note the number (e.g., COM3). Open your cutting software (Artcut, SignMaster, etc.).
| Feature | USB Connection | Serial (COM) Connection | |---------|---------------|------------------------| | | Easier for modern computers | Requires COM port configuration | | Driver requirements | Needs specific USB driver | Often uses generic serial drivers | | Cable availability | Standard USB cables widely available | RS-232-C serial cables harder to find | | Distance limitation | ~5 meters (16 feet) | ~15 meters (50 feet) | | Speed | Faster (480 Mbps) | Slower (up to 115.2 Kbps) | | Recommended for | Most users | Users with older systems |
In Device Manager, ensure your COM port settings are: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None. 4. Software Integration Install the "Fixed" Driver These are often bundled
Follow the prompts. If it says "Driver is pre-installed," that’s a good sign.
Once downloaded, you need to install the driver correctly to overwrite any generic Windows drivers that might be causing communication blocks.
Once you have the correct file, follow these steps for a "clean" installation: Run as Administrator : Right-click the file and select Run as Administrator to prevent registry permission errors. Manual Port Assignment
Always use verified sources to avoid corrupted files that cause connection errors.
