tools system deploy-image http://10.10.10.200/images/srlinux-24.10.1.bin reboot
Maintain at least 4 inches (10 cm) of clearance at the front and rear of the chassis for cabling, air circulation, and maintenance access. Tools and Equipment Required Phillips #1 and #2 screwdrivers Torque wrench with appropriate bits
The system will not boot safely without at least three functioning fans.
The Nokia 7250 Interconnect Router (IXR)-X1 is a high-density, compact router designed for edge and aggregation networks. Proper installation ensures optimal network performance, hardware longevity, and safety. This comprehensive guide provides step-by-step instructions for unboxing, mounting, powering, and performing the initial configuration of the Nokia 7250 IXR-X1. 1. Pre-Installation Planning and Safety nokia 7250 ixr x1 installation guide
Repeat the process for the second PSU to ensure 1:1 power redundancy. Installing Fan Trays Align the fan module with the fan slot. Slide the module completely into the chassis.
srlinux$ system hash-password MySecret123
Attach the feed lines to the terminals following strict polarity guidelines: to RTN, Negative (-) to -48V. tools system deploy-image http://10
Console cable (RJ-45 to DB-9 or USB, depending on ship variant)
Turn on both PSU circuit breakers or plug in both AC cords.
Install the protective plastic terminal cover over the studs. Interface and Cabling Connections Pre-Installation Planning and Safety Repeat the process for
Connect the cord to the AC power outlet and turn on the circuit breaker. For DC Power Models Turn off the external DC circuit breakers.
You are now in the Linux shell ( bash ). To enter the SR Linux CLI: