Monitor the digital pressure gauge on the screen to prevent exceeding application limits.

Always test the ELSD/RCD safety button monthly to ensure it is functioning correctly.

Neglecting daily and weekly cleaning routines is the leading cause of clogging and actuator degradation in micro-jetting systems. Daily Maintenance (Post-Shift) Depressurize the fluid delivery system completely.

: An automatic thermal cut-out triggers at 55°C to protect users against accidental scalding and system overheating.

This device mixes high-voltage electricity (4.5kW) with water. Do not attempt to install or repair it yourself. Always use a qualified professional who can ensure the unit is correctly grounded, on a dedicated circuit, and that its built-in ELCB safety mechanism is functioning properly. With proper professional setup and by following the user manual, the Alpha V1 JET-EM provides a safe, efficient, and modern hot water solution for your home.

) to the target substrate. Any tilt will skew the trajectory of the jetted micro-droplets. Pneumatic Connections

: The heater must be permanently connected to the electricity supply via a double pole linked switch

Move to 'Active' mode. Monitor the LED diagnostic panel—a solid green light indicates optimal pressure. 4. Maintenance Schedule

Operating your Alpha V1 JET-EM is straightforward. Follow this daily sequence to ensure optimal performance: Alpha Instant Water Heaters - Facebook

Enables automatic operation.

Disconnect power and check the input phases. Allow the motor to cool down for 20 minutes before resetting the thermal relay. System Fault: Pressure Drop During Operation

Regularly press the "Test" button to ensure the Electronic Leakage Safety Device (ELSD) cuts power. Use the "Reset" button to resume.

Automatically cuts off power in the event of current leakage (as low as 15mA) and includes a lightning protector. 2. Installation Guidelines

For safe installation and operation of the Alpha V1 series, you should refer to the V10 Instruction Manual provided by Alpha Home Appliances Essential Safety & Installation Guidelines Qualified Professional Only

IP25-rated casing protects the inner components from water spray.