Rapid Intel Storage Technology F6flpyx64nonvmdzip Install

Select your drive and click to continue your clean Windows installation normally. Troubleshooting Common Errors Driver Is Not Found or Is Incompatible

This comprehensive guide covers how to locate, prepare, and install the Intel RST Non-VMD driver during a clean Windows setup. Why Windows Cannot See Your Drive

The same drive used for your Windows installation media.

and navigate to the folder on your USB where you saved the extracted drivers. Select Driver: 10th Gen or older CPUs: Look for the f6flpy-x64 rapid intel storage technology f6flpyx64nonvmdzip install

Move the extracted folder onto your Windows Installation USB drive . 2. Load Driver During Windows Setup

The f6flpyx64nonvmdzip or f6flpyx64vmdzip files are the specific "F6" drivers needed to resolve this and allow the installer to see your NVMe SSD or hard drive. 1. Identify the Correct Driver Version

During a "Custom" Windows installation, users may encounter an error stating, "We couldn't find any drives". This occurs because the Windows setup media lacks the specific Intel RST driver needed to communicate with the storage controller. The format is essential because it contains the raw files that Windows Setup can read. Intel Community 2. How to Obtain the Driver Intel has largely replaced standalone downloads with a single SetupRST.exe installer, but the driver files can still be extracted. Intel Community Official Source: Download the latest RST driver from the Intel Support Page Manual Extraction: If only an is available, you must extract it using a command terminal: PowerShell as an administrator in the folder containing SetupRST.exe Run the command: ./SetupRST.exe -extractdrivers SetupRST_extracted A folder named SetupRST_extracted will be created containing the driver files. Intel Community 3. Step-by-Step Installation Procedure Prepare USB: Select your drive and click to continue your

| User Scenario | Recommended Method | Difficulty | |---|---|---| | | Method 1 (Extract via PowerShell) | ⭐⭐ (Intermediate) | | You are installing Windows on a standard single drive | Method 3 (Disable VMD in BIOS) | ⭐ (Easy) | | You have a pre-built system (Dell, HP, Lenovo, etc.) | Method 2 (Download from Manufacturer) | ⭐ (Easy) | | You are comfortable with command-line tools | Method 1 (Extract via PowerShell) | ⭐⭐ (Intermediate) | | You are creating installation media on Linux/Mac | Method 2 (Manufacturer) or Method 1 | ⭐⭐⭐ (Advanced) |

The standard f6flpy-x64.zip includes VMD support. On many new systems, enabling VMD in BIOS and using that driver works fine. However, the nonvmd version is a lifesaver when:

: After installation, it's recommended to restart your computer to ensure the new driver is properly loaded. and navigate to the folder on your USB

: After selecting the folder and clicking OK, Windows will scan for compatible drivers. A list will appear. Select the driver that says something like "Intel RST VMD Controller" and then click Next .

The driver manages storage devices (SSDs, HDDs) in Intel-based systems, especially for NVMe SSDs and RAID arrays . When you do a clean Windows installation on many modern Intel computers (10th Gen and newer), the Windows setup program may not automatically detect your NVMe SSD. This happens because the generic drivers included with Windows don't recognize the Intel RST or VMD storage controller. The F6 driver package provides the necessary .inf and .sys files for Windows Setup to see your drive.