Download Updated: Usbports.kext
Open your config.plist using a plist editor (like ProperTree).
Since you cannot download it, you must build it. The process takes about 20 minutes, but it is the only reliable method.
This guide is for informational purposes only. The author is not responsible for any damage or data loss that may occur. Always back up your important data and your EFI folder before making any changes to your system. Hackintosh building requires technical knowledge; this guide assumes you are comfortable with file management, BIOS settings, and your bootloader's configuration.
This comprehensive guide will explain what USBPorts.kext is, why downloading a pre-made one is a bad idea, and exactly how to generate your own using modern, reliable tools like . What is USBPorts.kext? usbports.kext download
Click the icon (a folder with an arrow) at the bottom of Hackintool.
Remove USBInjectAll.kext from your Kexts folder and disable it in your config.plist .
Use and the XhciPortLimit quirk temporarily to see all ports. Open your config
Searching for a direct USBPorts.kext download is generally discouraged because this file is not a universal driver
If you are building or maintaining a Hackintosh, you know that getting USB ports to work correctly can be one of the most frustrating parts of the process. You might notice that your USB 3.0 ports only run at USB 2.0 speeds, or your bluetooth stops working after your PC wakes up from sleep.
Before you begin creating your kext, you need to bypass the macOS port limit temporarily so all physical ports can be detected and mapped. This guide is for informational purposes only
(for OpenCore):
Your specific PC case determines which internal headers are used.
Defines exactly which ports are active and their type (USB 2.0, USB 3.0, Type-C). It is efficient, native, and stable. How to Create/Download Your Custom USBPorts.kext
Open (About This Mac -> System Report). Under Hardware -> USB. You will see a list of USB controllers (e.g., XHCI Controller). Note down the Vendor ID and Product ID .
Because each motherboard has a unique layout, you must create this file yourself using one of the following methods: Download Hackintool and navigate to the USB tab.