Go to the tab to configure the auto-cutter and cash drawer. Troubleshooting Tysso PRP-300 Go to product viewer dialog for this item. Driver Issues If you encounter issues, try these common fixes:
The PRP-300 is manufactured by and sold under the TYSSO brand. To communicate properly with your computer, the printer needs the appropriate driver software. Without it, the printer may not be recognized, fail to print, or encounter errors when opening the cash drawer.
in the printer properties (Control Panel > Devices and Printers) to ensure the correct USB or COM port is assigned. Target Integration Printer Driver of PRP-188 PRP-250 PRP-300 PRP-350 - tysso
If your Tysso PRP-300 fails to print after following the steps above, try these common fixes:
This driver package is compatible with Windows 7, 8, 10, and 11. Installation Instructions tysso prp-300 driver download windows 10
During setup, you will be prompted to select your connection interface: USB, Serial, or TCP/IP (Ethernet) .
Navigate to the tab and ensure the checkmark matches your physical connection (e.g., USB001 or USB002 for USB connections). Go back to the General tab and click Print Test Page .
Go to the tab to set the default paper width to 80mm x Receipt to prevent text truncation. 5. Troubleshooting Common Installation Issues
To download and install the driver for Windows 10 , use the following official resources and steps: 1. Download the Driver Go to the tab to configure the auto-cutter and cash drawer
Connect the USB cable to an active USB port on your PC and switch the printer's power button to .
: You can download the latest drivers directly from the Tysso (Fametech) Support Page .
Even with proper installation, you might run into issues.
Once installed, verify that Windows 10 communicates perfectly with the printer's firmware. To communicate properly with your computer, the printer
—this is a critical step for Windows 7 and later, including Windows 10 img.pospartner.cz Interface Selection
Check the "Device Settings" in Printer Properties and ensure the cash drawer setting is enabled. Conclusion Installing the correct Tysso PRP-300 Go to product viewer dialog for this item.
This guide will walk you through the safest and fastest ways to download and install the TYSSO PRP-300 driver on Windows 10 (32-bit or 64-bit).
Plug the power adapter into a wall outlet and turn on the printer switch.
Plug the Tysso PRP-300 into a power outlet and turn it on. Connect the printer to your Windows 10 computer using the provided interface cable (typically USB).