, there are three practical ways to make them work together:
Now that the V2Ray proxy client is running locally inside your router at 172.16.10.2:10808 (SOCKS5) and 172.16.10.2:10809 (HTTP), you must direct your network traffic through it.
was a strict disciplinarian, preferring its own internal protocols. But with the arrival of RouterOS v7 and its support for Containers , Elias saw an opening.
/ip/firewall/filter/add chain=forward action=accept connection-mark=!V2Ray_Conn comment="Allow V2Ray to bypass FastTrack" Use code with caution. DNS Leak Prevention
This is where the actual deployment happens. There are two main ways to deploy a container: v2ray mikrotik
: Use /ip/firewall/mangle rules to "mark" traffic you want to send through the V2Ray tunnel and use a custom routing table to send that traffic to the container's IP. 4. Community Resources
By default, containers will start when the router boots up.
/interface bridge port add bridge=dockers interface=veth1
Once your container is running, you must configure RouterOS to send traffic through it. This involves creating a special routing table to handle the traffic you want to proxy. , there are three practical ways to make
To help refine this setup for your network, could you provide a few more details?
Your local V2Ray gateway will receive unencrypted traffic from the MikroTik router, wrap it in the V2Ray protocol (VMess, VLESS, or Trojan), and send it to your remote VPS. 1. Set Up the Linux Environment
/ip firewall filter add chain=forward action=accept connection-state=established,related in-interface=dockers
[ Local Devices ] │ ▼ [ MikroTik Router ] ──(Mangle Rule / Route)──► [ Local V2Ray Gateway ] │ │ (Normal Traffic) (Proxy Traffic) │ │ ▼ ▼ [ Public Internet ] [ V2Ray Server ] Phase 1: Configuring the Local V2Ray Gateway Troubleshooting Common Issues
You can pull the official V2Ray image directly from Docker Hub. Configure the registry URL: /container/config/set registry-url=https://docker.io Use code with caution.
/ip/firewall/nat/add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8080 comment="Redirect HTTP to V2Ray Parent Proxy" Use code with caution.
The masquerading rule ensures that traffic from your containers can reach the internet through your router’s WAN interface. The forward rules establish basic connectivity for traffic moving between the container network and the outside world.
/container/envs/add name=v2ray_env key=CONFIG_JSON value="your_full_base64_config_here" Use code with caution. 2. Add and Start the Container
/ip/firewall/mangle/add chain=prerouting src-address=192.168.88.50 action=mark-routing new-routing-mark=v2ray_route passthrough=yes comment="Route specific device through V2Ray" Use code with caution. Troubleshooting Common Issues