H-ig41-uatx Rev 1.1 Manual

One of the biggest challenges with OEM boards like the Eton is the lack of labels on the front panel pins. Use this layout to connect your case power button and LEDs. 9-Pin Header Layout Pin Number Assignment Hard Drive Activity LED (HDD LED) 2-4 5-7 Reset Switch (Note: Some HP cases omit this) 6-8 Power Button (PWR_SW) 9 Reserved/Empty 💾 CPU Support List

For vintage sound cards or diagnostic cards.

The , often referred to by its HP/Compaq codename Eton , is a microATX motherboard manufactured by Foxconn for use in various HP desktop models such as the Compaq 500B and CQ3212L . It is built around the Intel G41 chipset and designed for the LGA 775 socket . Core Specifications h-ig41-uatx rev 1.1 manual

PC3-10600 (DDR3-1333), PC3-8500 (DDR3-1066), or PC3-6400 (DDR3-800); Non-ECC and unbuffered only.

The official manual is rare, but here are the best places to search: One of the biggest challenges with OEM boards

If you are refurbishing an old system or troubleshooting a boot error, finding the original documentation can be difficult. This guide serves as a comprehensive manual for the H-IG41-UATX Rev 1.1. 🛠️ Technical Specifications

The Rev 1.1 board is built on the Intel G41 Express chipset, designed for reliable office and light multimedia use. Micro-ATX (24.4 cm x 21.8 cm). Socket: LGA 775 (Socket T). Front Side Bus (FSB): 800/1066/1333 MHz. The , often referred to by its HP/Compaq

: 4x SATA II (3.0 Gbps) ports for hard drives and optical drives. Rear I/O : 4x USB 2.0 ports. 1x RJ-45 Ethernet port (Realtek RTL8103E). Audio jacks (Line-in, Line-out, Microphone). Installation and Power

A: No. Rev 1.1 exclusively uses DDR3 DIMMs. DDR2 is for earlier revisions.

Connecting a non-HP case to this board can be tricky because the headers are often proprietary. The main front panel header is a 9-pin connector