V21 Manual Link !new! | Makerbase Mks Dlc

The MKS DLC V21 offers a range of advanced configuration options, including:

Makerbase hosts all of its official hardware manuals, pinout diagrams, firmware, and documentation on GitHub. Use the links below to access the official repositories directly:

X, Y, and Dual Y-Axis (or Z) support for precise movement.

Each header includes a Signal (S) and Ground (G) pin. Ensure your limit switches are wired to the correct pins to avoid triggering a hard limit error immediately upon booting. Initial Software Setup and Configuration makerbase mks dlc v21 manual link

Correct wiring is the most crucial step in building a reliable machine. The official wiring manual ( direct PDF link ) is your definitive guide. Here is a breakdown of the key connection points:

Your steps/mm settings ($100-$102) are incorrect. Calculate your steps based on your lead screw pitch or belt pulley size.

The MakerBase MKS DLC V21 is a powerful and feature-rich 3D printer controller that offers unparalleled control and flexibility over your 3D printing experience. With its user-friendly interface and robust feature set, the MKS DLC V21 is an ideal solution for both beginners and experienced 3D printing enthusiasts. By following the comprehensive guide outlined in this article, you'll be able to unlock the full potential of your MKS DLC V21 and take your 3D printing to the next level. The MKS DLC V21 offers a range of

⚠️ Some sellers label the board as but ship v2.1 — check the silkscreen on the PCB. v2.1 often has a green PCB and improved ESP8285 circuit.

The MKS DLC V21 is a 3D printer control board designed by Makerbase, a well-known company in the 3D printing community. The board is known for its reliability, ease of use, and flexibility.

For additional files (pinout, firmware, schematics): Ensure your limit switches are wired to the

Set to 1 if you are using a laser cutter/engraver (enables dynamic power scaling during acceleration). Set to 0 if you are using a traditional routing spindle.

Happy printing – and always read the documentation first.

Insert A4988/TMC2209 drivers into the X, Y, Z slots, ensuring the potentiometer (screw) faces away from the power input.

: Comprehensive guide for the 32-bit version, which shares many pin configurations and wiring standards with the original DLC. Pinout Guide (Direct PDF)