Spreadtrum Imei Tool V4.1 __exclusive__ Jun 2026

: Ensure you have installed the correct Spreadtrum/Unisoc drivers on your PC so the device is recognized in Original IMEI : Locate your device's original IMEI, usually found on the retail box battery compartment , or by dialing if the phone still boots. Step-by-Step Guide Launch the Tool : Open the WriteIMEI.exe application from the extracted folder on your PC. Configure Settings button to configure the tool for your device. Mode Select Normal Mode (or the mode specific to your device's state), and click Port Selection

: Launch the Spreadtrum IMEI Tool and select the appropriate chipset or "Auto Detect" if available.

A working data cable to link the phone to your PC. How to Use Spreadtrum IMEI Tool V4.1 Follow these steps carefully to rewrite your network code:

Changing or cloning IMEI numbers is illegal in many countries. This tool should only be used for legitimate repair purposes—specifically, restoring the device's original IMEI after a system failure. Spreadtrum Imei Tool V4.1

Click the or Write button on the software interface. The tool will enter a standby state, waiting for the device. Power off your phone completely.

: Install the necessary SPD/UNISOC USB drivers on your PC to ensure the device is recognized in "SPD U2S" or "COM Port" mode.

The interface for V4.1 is generally utilitarian and minimalistic: : Ensure you have installed the correct Spreadtrum/Unisoc

An IMEI is like a digital fingerprint. Use this tool to restore, never to forge.

Hold the designated boot key (usually or Volume Up , depending on the OEM) and connect the phone to the PC via the USB cable.

If V4.1 fails or seems too risky, consider these alternatives: Mode Select Normal Mode (or the mode specific

A timeout usually happens if the phone boots into charging mode instead of the required diagnostic/calibration state. Ensure you are holding the correct boot key combination while plugging in the cable. Alternatively, you may need to load the specific database file ( BPLGUInfoCustomAppSrcP_... ) extracted from your device's official stock ROM. Safety and Legal Compliance

Release the boot key as soon as the software detects the phone and the progress bar begins to move. Step 5: Finalize the Repair

Remove and reinsert the battery (if removable), then power on the device.