Invt Che100 Inverter User Manualpdf Access

Set to 0 for Sensorless Vector Control or 1 for V/F control.

Overvoltage during acceleration, deceleration, or constant speed. LU: Undervoltage (check input voltage). OC1/OC2/OC3: Overcurrent (check motor wiring and load).

: Standard for models from 0.4kW to 11kW ; larger units require an external braking unit.

This section includes:

The CHE100 provides 4 programmable digital input terminals and analog inputs (0-10V or 0-20mA) for versatile control.

The keypad is the primary interface for local control. The main keys include:

Automatically maintains a constant output voltage even when the input voltage fluctuates. Built-in Braking Unit: Integrated for models ranging from 0.4 kW to 11 kW Invt CHE100 Inverter User Manualpdf

A common frustration is the inverter tripping on an error like E0.01 (Overcurrent at acceleration) or E0.05 (IGBT module fault). The user manual provides a structured fault list, possible causes, and corrective actions.

Follow these steps:

The highest frequency the drive can output during normal operation. P0.06 (Frequency Source Selection): 0 : Keypad digital setting (Modified via UP/DOWN keys) 1 : Analog Input AI1 (External potentiometer) 2 : Analog Input AI2 (External current/voltage sensor) Set to 0 for Sensorless Vector Control or 1 for V/F control

The manual provides a troubleshooting matrix for common fault codes:

: Includes 4 programmable digital inputs (DI), 2 analog inputs (AI), 1 relay output, and 1 analog output. 3. Key Parameter Settings

: Equipped with 4 programmable digital inputs , 2 analog inputs, and various outputs (relay, analog, open-collector). OC1/OC2/OC3: Overcurrent (check motor wiring and load)