There are two primary methods to initiate the Lollipop installation on the MediaPad X1. Method A uses the built-in system menus, while Method B utilizes physical hardware keys if your tablet cannot boot properly. Method A: Local Update via Settings (Recommended)

The first boot after a major Android version upgrade takes significantly longer than usual (up to 15 minutes) as the system configures the new ART runtime cache.

Be sure to identify your exact device model before proceeding, as flashing the wrong firmware can permanently brick your tablet. You can check this by going to (common models include ⚡ Prerequisites

The MediaPad X1 7.0 was released in several regional variants. Navigate to and note your exact model number: 7D-501u: The global 3G-only version. 7D-501L: The global 4G LTE version.

Copy the UPDATE.APP file from the extracted download package and paste it directly inside the dload folder.

The originally launched with Android 4.2 (Jelly Bean) and later received an official update to Android 5.0 (Lollipop) via Huawei's EMUI 3.0 or 3.1 interface. Because this is an older device, you typically have two ways to install the update: an automatic over-the-air (OTA) update or a manual "dload" installation. Method 1: Automatic Over-the-Air (OTA) Update

Safely eject the MicroSD card from your computer and insert it into your MediaPad X1. Power on the tablet. Open the menu. Navigate to Updates (or System Updates ). Tap the Menu button (or Local Update option). Select Local Update .

You will need a microSD card (at least 2GB) formatted to FAT32.

If a Lollipop update appears, follow the prompts to download and install it. Method 2: Manual Installation (The "dload" Method)

Your exact (e.g., 7D-501u or 7D-501L) Your current Android and EMUI version

The Lollipop beta comes as :

The first boot after a major update can take up to 10–15 minutes. Be patient.

Disclaimer: This guide is for informational purposes only. Modifying your device's firmware carries inherent risks, including permanent damage or data loss. The author and referenced sources assume no responsibility for any issues arising from following these instructions. Always verify ROM integrity and source authenticity before flashing.

If your device boots normally into Android KitKat, use this seamless method: Turn on your MediaPad X1.

Copy the entire folder (containing UPDATE.APP ) directly to the root directory of your MicroSD card.

If you need help finding the files, tell me your exact from your settings. I can also help you troubleshoot if you run into any error messages during installation. Share public link