Prosecure Opti Combi Manual English Patched -

What are you wiring this sensor into?

: You can set the "learning" or monitoring time for the safety zone. For example, a value of "2" often corresponds to a 30-second learning period.

Time the safety relay stays active if a static object is detected. As / Bs / Cs / Ds

Adjust the inclination angle display on the clear scale to position the safety curtain precisely relative to the door's closing edge. prosecure opti combi manual english

Proper installation is crucial for the optimal functioning of the ProSecure Opti Combi Go to product viewer dialog for this item.

Unplug the unit for 10 seconds and restart for a new calibration cycle. 6. Compliance and Technical Data

Once powered on, you must configure the detection fields to match your specific entryway dimensions. Radar Motion Field Adjustments What are you wiring this sensor into

The ProSecure Opti Combi uses a color-coded wire harness. Incorrect wiring can destroy the sensor microprocessor or the door controller board. Always switch off main power to the door drive before wiring. Standard Wiring Assignment

The Prosecure Opti series (Motion/Combi) is designed for automatic door operators, combining radar technology for motion detection with infrared technology for presence detection (in Combi models). The device is engineered to activate, open, and safeguard passage areas, complying with safety regulations like DIN 18650 and EN 16005. 2. Package Contents & Technical Specifications

IP54 (suitable for external doors when protected from direct driving rain). Temperature Range: -20°C to +60°C (-4°F to 140°F). 2. Package Contents & Component Layout Before starting, verify you have all the necessary parts. What is in the Box 1 x ProSecure Opti Combi Sensor 1 x 3-meter Connection Cable 1 x Mounting Template (Drilling Guide) 2 x Mounting Screws 1 x English Instruction Leaflet Component Identification Time the safety relay stays active if a

The ProSecure Opti Combi features built-in programming keys and an LED status indicator display. Configuration can be performed via on-board buttons or an optional infrared remote control. Programming Using On-Board Buttons

| Feature | Specification | |---------|----------------| | | Standard PAN, Orthogonal PAN, Pediatric, Bitewing, TMJ (open/closed), Sinus, Maxillary/Mandibular arch | | Focal Layer | Multi-layer (adjustable default positions) | | Magnification | Constant magnification across all programs (typically 1.2–1.3) | | Image Layer | Aspherical multi-layer technology | | Patient Positioning | Three-point laser guidance (midsagittal, Frankfurt horizontal, canine) |

This is where most errors occur. The outlines a two-step process: