Fix Ml1660 V1.01.00.30.fls: Patched
Once the hard-coded page limit is reached, the printer halts all functions and presents a solid red status light .
After the restart, you must mask or remove the chip on the toner cartridge. If the chip remains active, the printer may continue to report a "Toner Low" error despite the fix. Common Troubleshooting
⭐⭐⭐⭐☆ (4/5)
: The printer's LED light will alternate rapidly between green, orange, and red. Do not touch the printer or disconnect the cable during this cycle.
The .fls (or .hd ) file acts as a modified firmware file. When forced into the printer's flash memory, it rewires the inner logic of the engine, allowing the printer to bypass the chip authentication loop entirely. Technical Specifications Table Samsung ML-1660, ML-1665, ML-1667 Compatible Base Version V1.01.00.30 (Does not downgrade V1.01.00.34 or higher) File Formats Available .fls or .hd Primary Utility Tool usblist2.exe or usbprns2.exe Post-Flash Toner Status Permanently locked at 100% Critical Warnings and Prerequisites Fix Ml1660 V1.01.00.30.fls
Connecting the printer via USB (wireless/network flashing is not recommended due to stability risks). Execution: Running a flashing utility (like usbprns2.exe FirmwareDownloader.exe ) that sends the file to the printer. Hardware Modification:
The printer's status light will usually change color or flash as the memory is rewritten. It is critical not to turn off the printer during this period, as power loss can permanently disable ("brick") the device.
: Do not attempt this over a network; use a direct USB cable connection between your computer and the printer.
Firmware fixes are version-dependent. Using a V1.01.00.30 fix on a printer with a higher original firmware version (like V1.01.00.34) can "brick" the device, making it unusable. Implementation Process Once the hard-coded page limit is reached, the
Applying unofficial or "fix" firmware typically voids any remaining manufacturer warranty.
This article provides a deep dive into what the error means, why it occurs, and step-by-step solutions to bring your printer back to life. We will cover everything from corrupted firmware updates to mainboard replacement.
When a technician or user manually updates the firmware, they use a .fls file together with a proprietary flashing tool (like Samsung’s FloTool or SRP Utility ). If the flashing process is interrupted—by a power outage, a loose USB cable, or an incompatible OS—the printer’s ROM becomes corrupted, and it may “hang” looking for the specific V1.01.00.30.fls signature.
Once the firmware installation finishes successfully, the internal chip validation systems must be physically isolated to maintain the patch's parameters: When forced into the printer's flash memory, it
When fixing the ML1660 V1.01.00.30.fls file, be aware of the following potential risks:
: This is the most dangerous part. If your printer currently has a higher firmware version (e.g., v34 or v35), attempting to flash v30 can brick the device (render it permanently unbootable). You must verify your current version by printing a Configuration Report (hold the Stop button for about 5 seconds until the light blinks).
: A small command window will appear and close automatically. The printer’s status light will blink rapidly while it reprograms.
Ensure your Samsung ML-1660 is connected directly to your computer using a reliable USB cable. Network or Wi-Fi connections are not supported for firmware flashing.
