Timer Ew-32 User Manual: Chevron Digital

: Use the UP and DOWN buttons to select the correct hour, minute, and day of the week.

Before the first use, press the R (Reset) button using a small pin or paperclip to clear any previous settings. The display should show 12:00 or 00:00.

Do you need a schedule that changes or stays the same all week?

Internal battery retains settings during power outages. chevron digital timer ew-32 user manual

Once the display activates, use a paperclip or a small pen tip to press the recessed RESET button. This clears any factory testing data and initializes the system memory. 3. Setting the Current Time and Day

Press and hold the button for 3 seconds to toggle between standard 12-hour formatting and 24-hour formatting. The "AM" or "PM" indicator will appear in the 12-hour format. Activating Daylight Saving Time (DST)

A: No. You must manually adjust the hour using the CLOCK button twice a year. : Use the UP and DOWN buttons to

The connected appliance does not turn on even though the timer says "ON".

While holding , press the MIN button to advance the minutes. Release the CLOCK button. The clock is now running. Switching Between 12-Hour and 24-Hour (Military) Format

button once to enter this mode. Set your desired duration and press the button to start. Key Specifications Standard household wall outlets. Large LCD showing time, day, and active programs. Do you need a schedule that changes or

button for about 3 seconds until the display begins to flash. Adjust Values: (or UP/DOWN) buttons to set the current Day of the Week

Q: What are the advanced features of the Chevron digital timer EW-32? A: The device features an alarm function, lap time recording, and memory recall.

— bookmark it, print it, or keep it next to your timer. And remember: when in doubt, slide the switch to “Auto” and press RESET .

The LCD screen will flash, and all settings will be cleared. Step 3: Setting the Current Time Hold down the button. While holding CLOCK , press WEEK to set the correct day. While holding CLOCK , press HOUR to set the hour. While holding CLOCK , press MIN to set the minutes. Release the CLOCK button when finished. 4. Programming the Timer (Step-by-Step) The Chevron Digital Timer EW-32 Go to product viewer dialog for this item.