Insert the software media or open the authorized Carrier download package.
: Beyond USB, the tool supports Ethernet and modem dial-up connections. For Ethernet-based connections, the manual explicitly advises disabling network firewalls to prevent communication blockages. Installation and Setup
Allows users to assign or modify unique CCN device addresses. Data Table Display
Connect the USB-485 converter pins to the matching network lines. Pin + to CCN + Pin - to CCN - Pin G (Ground) to CCN Signal Ground Carrier Network Service Tool V Manual
Unlike modern plug-and-play software, the Network Service Tool relies on specific hardware keys.
Click the icon on the toolbar to discover active controllers. The software will automatically populate the Network Tree View with found devices. Viewing and Modifying Point Data
Navigate to the containing the target output (e.g., fan relay, valve actuator). Right-click the specific variable line item. Select Override or Force Value from the context menu. Insert the software media or open the authorized
Before launching the software, ensure your hardware and operating system meet the technical specifications. Technical Prerequisites : Windows 10 or Windows 11 (64-bit).
Input the desired test state (e.g., Force ON, or 50% modulation).
Wire the 3-pin connector from the converter module to the corresponding terminals on the bus. Ensure you maintain correct polarity to avoid communication dropouts. Installation and Setup Allows users to assign or
To check if hardware is communicating on the CCN network:
Requires a two-part installation (USB Bus driver followed by the Port driver) before the converter is connected. 📝 Operating Procedures
Running in demo mode restricts saving changes to configuration tables. Share public link