Transas Navi Sailor 4000 Test Answers Updated ~repack~
Whether you are preparing for initial type-specific training, upgrading your certification, or simply refreshing your knowledge before a flag State inspection, this guide serves as your roadmap. Master the fundamentals, practice on the system, and approach your examination with confidence.
How do you silence the “Lost Position” alarm when temporarily entering a tunnel? Updated Answer: Alarms > Acknowledge > Suspend Sensor Alarm (15 min max) – You cannot fully disable it; you only suspend. Choosing “Disable” is an automatic fail.
These are the most common topics in vetting and certification assessments. :
| Version | Common Test Focus | Outdated Answers to Avoid | | :--- | :--- | :--- | | NS 4000 (Legacy) | Basic chart loading, manual updates | Color scheme for shallow water | | NS 4000 v2.0 | Layering, AIS targets, safety contours | Menu path for "Chart Alarms" | | NS 4000 v4.0 (Current) | Route checking, auto-update integration, sensor fusion | Position offset method | transas navi sailor 4000 test answers updated
Loading permits, updating ENC (Electronic Navigational Charts), and checking chart status.
Marks the limit of very shallow water, usually set to the vessel's draught.
Settings -> Safety Parameters -> Input Safety Contour based on ship's draft, squat, and safe water depth. Navigation and Monitoring Q: How to display the Safety Frame? A: Settings -> Safety Parameters -> Tick Show Safety Frame . Q: How do you measure the distance between two points? Updated Answer: Alarms > Acknowledge > Suspend Sensor
A: ECDIS is an Electronic Chart Display and Information System. With adequate backup arrangements, it is accepted as complying with the up‑to‑date chart requirement under . It displays selected information from a SENC together with positional data from navigation sensors to assist in route planning and monitoring.
Most Computer Based Training (CBT) modules, like those from Mintra or Ocean Learning Library , verify your ability to:
The Transas Navi-Sailor 4000 offers a range of features that make it an essential tool for mariners. Some of the key features include: : | Version | Common Test Focus |
Including parameters used for automatic safety checks.
: To find the last LOP (Line of Position) fix, check the Log Book under the Event list .
Use the EBL/VRM tool or the Range & Bearing tool in the left toolbar.
Disclaimer: This information is based on public training documentation and simulator experience. Always refer to your vessel’s specific Type Specific Training and the Transas User Manual for the most accurate guidance.
The chart display must be set to North-Up or Course-Up (stabilized modes) to accurately align and synchronize raw radar video video overlays with the ENC vectors. Best Practices for Passing Your Assessment