Connect to the negative terminal of your DC source.
The ZK5KX manual highlights the following key features and functions:
In the main interface, press the encoder knob to move the cursor to the voltage digits to make quick adjustments.
Press once more to save and exit back to the main screen. zk-5kx_voltage-converter.pdf - eleneasy.com
Once powered, the device will display a boot screen followed by the main idle screen showing the current time and date. zk5kx manual
to adjust the amp limit up or down. Short press the rotary encoder knob to jump between digits.
Before using the ZK-5KX, please observe all safety guidelines to avoid damage to the module, your devices, or yourself.
A digit in the current display will flash; rotate the left or right to change the value.
from the normal operation screen. A specific digit of the voltage setting will begin flashing on the screen. Connect to the negative terminal of your DC source
: Do not connect the VIN- and VOUT- lines together. Short-circuiting or bridging the input and output ground paths bypasses the onboard low-resistance current shunt resistor, causing the constant current (CC) limiting feature to fail.
Default 37V. Protects your load from voltage spikes. OCP (Over Current Protection): Default 5.2A. OPP (Over Power Protection): Default 81W.
The CC (Constant Current) feature is perfect for charging Li-ion or NiMH packs. You can set the voltage to the battery's maximum and current to the safe charging rate.
The ZK5KX is a highly advanced control and monitoring device designed for industrial automation applications. It's a part of the ZK series, which is renowned for its reliability, flexibility, and performance. The ZK5KX is equipped with a range of features, including high-speed processing, advanced communication capabilities, and a user-friendly interface. zk-5kx_voltage-converter
Press the rotary encoder knob (or the ON/OFF button if separate) to enable or disable power output. Default Power-On State: Long press
Press the like a button to move the flashing cursor left or right across the digits. This lets you jump quickly between major values (1.0V steps) and minor values (0.01V steps).
If you want: a printable one‑page PDF, a longer user guide with diagrams, or a version tailored to firmware v2.1, tell me which.
The ZK-5KX is widely considered an excellent "bang-for-the-buck" module for hobbyists who need a compact, regulated power source.