Check the physical cable connections. If using USB, try plugging the cable into a different USB port on your PC and run the "Check USB Port" utility in printer properties again.
This guide provides a step-by-step walkthrough for downloading, installing, and troubleshooting the RP80USE driver on Windows and other operating systems. 1. Why You Need the Correct Rongta RP80USE Driver
Enter the current IP address of your Rongta printer. (Tip: To find your printer's IP address, turn off the printer. Hold down the button, turn the printer back on, and release FEED after two seconds. It will print a configuration receipt containing its current IP address). Click Install to map the network port. Step 5: Verify the Setup with a Test Page
Many users download the Rongta RP80USE driver setup not for Windows printing, but for integration with POS software like Loyverse, Square, Toast, or Micros.
Open the extracted folder and double-click the installation executable file (usually named POS Printer Driver Setup.exe or similar). download rongta rp80use printer driver setup
: To enable the cutter, go to Printing Preferences > Paper/Quality and set the Paper Source to "Report Cut" .
Technical Support Version: 1.0 Date: [Current Date] Printer firmware compatibility: RP80USE v2.0 and above
Prevents common errors such as "Printer Not Found," "Driver is Unavailable," or incomplete printing.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Download - Rongta Tech Check the physical cable connections
USB is the most common and straightforward connection method. After installing the driver, Windows typically assigns a virtual USB port (e.g., USB001 ). To confirm the port:
| Generic Driver | Works? | Notes | |----------------|--------|-------| | EPSON TM-T88V driver | Yes (partial) | Prints but cutter and drawer kick may fail | | Microsoft POS for .NET | No | Requires custom OPOS | | Generic/Text Only | Yes | No graphics, only raw text | | ESC/POS Generic driver (by nsoftware) | Yes | Full feature if COM port is correctly set |
Have a tip or correction? Share in the comments below (but for technical support, please contact Rongta directly).
Avoid third-party “driver download” websites. Many contain adware, outdated drivers, or malware. Always download from official or trusted sources. Hold down the button, turn the printer back
Before downloading anything, you must know which communication method you are using. The RP80USE integrates three ports:
Download the latest version of the Rongta RP80USE driver package to your desktop.
The installer usually detects your operating system automatically (e.g., Windows 10 or Windows 11). Verify that this is correct.
