Once finished, a green circle with a checkmark () will appear. Disconnect your phone and power it on.
Are you experiencing a specific error like a or frp lock that you need to resolve with this firmware? Wiko Sunny 5 - Specifications
Once the tool opens, click on the (Load Packet) located at the top-left corner. Browse to the folder where you extracted the firmware.
If the tool throws a "Failed" error immediately, verify that the downloaded .pac file is not corrupted and matches the W-K380 model exactly. You may also try using an older or newer version of the SPD Upgrade Tool.
Navigate to your extracted firmware folder and select the file ending in _Android_scatter.txt . wiko sunny 5 w-k380 firmware
Hold the button and connect the phone to your PC via USB.
The standard utility used to flash .pac firmware files onto Unisoc-powered devices. Download a stable version, such as or newer. Step-by-Step Installation Guide
Once complete, a green notification will appear under the status column.
Always prioritize downloading firmware from trusted communities, double-check your variant (V01/V02/V03), and never skip the driver installation step. With the information in this guide, you can rescue your Sunny 5 from virtually any software disaster. Once finished, a green circle with a checkmark
I can provide the targeted troubleshooting steps or direct links based on your setup. Share public link
Flashing will completely erase the internal storage of your Wiko Sunny 5. Back up your photos, contacts, and important documents to a computer or cloud service.
Click the (Load Packet) located at the top-left corner of the tool interface. Browse to the extracted firmware folder.
Navigate to the extracted firmware folder and select the scatter file (e.g., MT6580_Android_scatter.txt or similar). 2. Configure the Tool Ensure all partitions are checked in the list. Wiko Sunny 5 - Specifications Once the tool
While holding the button, connect the phone to your computer using a high-quality USB cable.
| Error Message | Meaning | Solution | | :--- | :--- | :--- | | | USB driver collision | Uninstall other MTK drivers. Use a different USB port. | | S_DL_GET_DRAM_SETTING_FAIL (0x13BE) | Incompatible preloader | You are using firmware for a different W-K380 variant. Get the correct build. | | PMT changed for the ROM | Partition size mismatch | In SP Flash Tool, go to Format -> Format whole flash (but you will lose IMEI). | | Error: Status_sec_img_type_mismatch | Auth file required | Your device has Secure Boot enabled. You need an authorized DA (download agent) from Wiko. |
: Avoid executable .exe flashers. They are often fake for this model. Use only the SP Flash Tool method.
Press and hold the key (this acts as the boot key for Unisoc devices).
Revives a "soft-bricked" phone caused by failed software updates or improper rooting.
Inside the tool, click on the (Load Packet button) located at the top-left corner. A file browser window will open. Navigate to the folder where you extracted the Wiko firmware, select the .pac file, and click Open . The tool will take a few moments to verify and load the system packages. Step 5: Boot the Phone into Download Mode