That said, the UHD 770 patching effort exemplifies the Hackintosh spirit: reverse engineering, community collaboration, and making hardware do what it was never intended to do. As Apple continues its transition away from Intel, these patches become both more fragile and more poignant—a final act of defiance against planned obsolescence. For now, with careful configuration and tempered expectations, the UHD 770 can indeed shine on macOS, albeit through a cracked, patched, and wonderfully unapproved lens.
To make a 12th or 13th Gen system work perfectly, users patch their config.plist to use: AMD Radeon RX 6800 / 6900 XT AMD Radeon RX 580 / 590
Because modern Intel CPUs utilize a hybrid architecture (P-cores and E-cores), macOS needs to be tricked into recognizing the processor topology to balance threads properly alongside the graphics layout. Under Kernel -> Emulate , apply the following parameters: 55060A00 00000000 00000000 00000000 Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000 3. Essential Kexts To Include
While this patch works remarkably well, it is a community "hack." Keep these points in mind: uhd 770 hackintosh patched
0300C89A (This hex value tells macOS to treat the chip as a headless compute engine).
As of April 2026, the short answer remains for the Intel UHD 770 in macOS.
The best suited SMBIOS for Alder/Raptor Lake is usually iMac20,1 or iMac20,2 , as they best mimic the Coffee Lake GPU requirements. That said, the UHD 770 patching effort exemplifies
(Fixes the 7MB bug)
: Use iMac20,1 or MacPro7,1 for the best compatibility with iGPU/dGPU setups.
The Ultimate Guide to UHD 770 Hackintosh Patching in 2026 Building a Hackintosh in 2026, especially with modern Alder Lake (12th Gen), Raptor Lake (13th/14th Gen), or newer Intel processors, often hinges on getting the integrated graphics working. The is a powerful, capable component, but macOS does not natively support 12th-gen or newer Intel iGPUs. To make a 12th or 13th Gen system
: Some users try spoofing the device ID to a 10th Gen Comet Lake ID (like
Version 1.0.0 or higher is recommended for 2026.
Set to PEG or PCIE if using a discrete GPU; set to IGFX if running without an external card. Fast Boot Secure Boot (or set to "Other OS")