If you have an old D-Link DIR-868L lying around, don't throw it away—it can be repurposed as a wireless repeater to extend your home network for free! Repurposing old routers is a great way to reduce e-waste and boost wireless signal around your home. This guide explains everything you need to know about enabling DIR-868L repeater mode, including stock firmware settings and advanced options like DD-WRT.
The DIR-868L can run warm when processing repeated signals. Ensure its ventilation ports are clear of dust.
Check for wireless channel congestion on your main router and switch to a cleaner channel. dir868l repeater mode free
Here are a few tips and tricks to help you get the most out of your DIR-868L in Repeater Mode:
The availability of repeater mode depends on your hardware revision and region. European models (DIR-868L/E) do not include this feature in stock firmware. North American models (rev A1) also lack official repeater mode support in most firmware versions. If you have an old D-Link DIR-868L lying
: Internal antennas focus signals directly toward your devices. The Secret: DD-WRT Open-Source Firmware
Under the virtual interface, set your desired password for your extended network (it can be the same as your primary password). Click and then click Apply Settings . Step 6: Disable the Firewall Go to the Security > Firewall tab. The DIR-868L can run warm when processing repeated signals
Do not throw away your old D-Link DIR-868L router. You can use it to eliminate Wi-Fi dead zones in your home for free. This guide shows you how to convert your old router into a powerful wireless repeater. Why Reusing the DIR-868L Makes Sense
Plug your computer directly into one of the LAN ports on the DIR-868L. Do not use Wi-Fi.
Click , select the downloaded DD-WRT file, and click Upload .
Click the or Site Survey button to find your home’s main Wi-Fi network.