Omron M4 Hem 722c1 E Manual Review

Press the "START/STOP" button. The cuff will inflate automatically.

Push the hook of the battery cover down and pull it off in the direction of the arrow.

Before initial use, verify that your packaging contains all standard components:

Clean the housing of the monitor with a soft, dry cloth. Never use abrasive cleaners, thinners, or gasoline. Use a damp, soapy cloth to gently clean the cuff, but do not submerge the cuff or tube in water. Omron m4 hem 722c1 e manual

Sit upright in a chair with your back supported. Keep your feet flat on the floor— do not cross your legs .

Remove tight-fitting clothing from your left upper arm. Do not roll up sleeves if they constrict your blood flow.

: Simple "Start" button initiates the measurement automatically. Error Codes and Troubleshooting Press the "START/STOP" button

Once finished, the cuff deflates completely. Your screen will display three key numbers:

If the monitor encounters a problem during measurement, the reading will stop, and an error code will display on the screen. Here are the most common codes found in the HEM-722C1-E manual: Error Display Potential Cause How to Fix It Inflation failure or movement.

You can use a compatible Omron AC adapter to save battery life. Plug it into the jack on the back of the monitor. Before initial use, verify that your packaging contains

Remove the battery compartment cover by pulling the hook upward.

Proper setup ensures your readings are correctly timestamped, which helps your doctor track blood pressure trends over time. Installing the Batteries Turn the main unit upside down.

Before using the device, familiarize yourself with its main components:

: Open the battery compartment on the bottom and insert 4 "AA" alkaline batteries, ensuring correct polarity.