Turn on the main switch on the Control Unit / Power Supply Unit.
For accurate heading data while underway, manual or automatic inputs for the ship’s speed (from the Speed Log) and latitude (from the GPS) must be entered into the control unit to counteract speed error. Shut-Down Procedure Press and hold the POWER off switch on the Control Unit.
While detailed physical installation must be performed by certified marine electronics technicians, the manual specifies crucial environmental parameters: yokogawa gyro compass cmz 700 user manual
| Parameter | Value | |-----------|-------| | Power supply | 24VDC (18-36V) or 115VAC 60Hz | | Consumption | 40W (max), 25W typical | | NMEA outputs | 2x isolated RS422, 4800–115200 baud |
Prevent fluid contamination by replacing all rubber seals during fluid changes. Turn on the main switch on the Control
The gyrosphere (Part No. KT005) is the heart of the CMZ 700 system, containing the sensitive spinning mass that detects Earth's rotation to find true north. This critical component has a defined lifecycle.
Do you need detailed instructions for a specific maintenance task, such as ? Share public link While detailed physical installation must be performed by
Once the underlying cause is resolved (e.g., restoring a lost GPS signal feed), press the button to clear the fault from the system memory. Technical Specifications Summary
Yokogawa CMZ 700 series is a high-performance gyrocompass system designed for diverse vessel types, offering three main configurations: (Single), and Связь и Радионавигация System Configurations CMZ700B (Basic):
If the primary gyro (Master 1) experiences a critical failure (e.g., E-21): Locate the on the bridge console. Switch the control from COMPASS 1 to COMPASS 2 .
If you are currently experiencing a (e.g., "Follow Up Error") or are in the process of installing a new repeater ,I can provide the relevant section of the manual or troubleshooting steps tailored to your situation. Are you currently using the 4th edition hardware? Is this a newly installed system or an existing one?