Erhardt-leimer — Do 3001 Manual
Note: If you change material types (e.g., switching from heavy cardboard to a thin polymer film), you must repeat this calibration process. Maintenance and Cleaning Routine
The is a digital command station that serves as the central control interface for a web guiding system. It integrates the controller functions and provides a user-friendly interface for operators to manage web position.
Offline mode & exports
The contrast difference between the background and web is too low. Erhardt-leimer Do 3001 Manual
: Offers versatile mounting solutions to fit different industrial machine setups. Installation & Maintenance Highlights
The system utilizes two sensors to track both edges simultaneously, ensuring the centerline of the material remains fixed, even if the material width fluctuates.
Comprehensive Technical Guide and Operator Manual Overview for the Erhardt+Leimer DO 3001 Introduction to the Erhardt+Leimer DO 3001 Note: If you change material types (e
Cut out a panel opening matching the dimensions specified in the manual's technical drawing.
Key features of the DO 3001 include:
The process repeats continuously, enabling automatic, real‑time web guidance. Offline mode & exports The contrast difference between
Align the actuator perfectly perpendicular to the direction of the web travel to prevent twisting forces on the material.
Connect the terminal to the main digital controller (e.g., DC 5501 or DC 5506) using the designated CAN bus or Ethernet connection, depending on the system configuration.
While exact wire colors can vary based on custom E+L cable assemblies, the standard pin assignment follows this structure: Pin Number Signal Name Description Main Power Supply Pin 2 Power Supply Ground Pin 3 CAN Bus High (Communication) Pin 4 CAN Bus Low (Communication) Pin 5 Analog Out Position Signal (0–10 V) Pin 6 Digital In 1 Remote Calibration / Tarring Pin 7 Digital Out Alarm / Error State Output Pin 8 Screen / Shield Functional Earth / Cable Shielding 4. Calibration and Commissioning Steps
Trigger the "Covered / Material" calibration option on the controller.