uses the chipset, you will need specific tools. Preparation: How to Hard Reset INFINIX Note 30 Pro - Remove Screen Lock

Your phone turns on but gets stuck in a boot loop, boots straight into recovery mode, or freezes on the Infinix logo.

Click the button and select the special MTK_AllInOne_DA.bin file specifically for the Infinix Note 30 Pro.

Use volume keys to select and press power to confirm. Select "Factory data reset" . Select "Reboot system now" .

While holding the volume keys, connect the USB cable from the PC to your phone.

Notes: If device not detected, try different USB ports/cables, reinstall drivers, or use testpoint method to enter boot mode.

: Use the volume keys to highlight Wipe data/factory reset and press the Power button to select. Confirm : Select Factory data reset to confirm the action. Reboot : Once finished, select Reboot system now . Method 2: Flash Stock Firmware (For Hard Bricks)

The first boot after flashing takes several minutes — this is normal. The phone should now boot into the factory system.

The INFINIX Note 30 Pro is powered by the MediaTek Helio G99 chipset. Your PC needs specific drivers to communicate with the phone when it is powered off. Download and install the package. 2. SP Flash Tool or Infinix Flash Tool

If the above methods don't work, you can try contacting INFINIX customer support for further assistance:

Disable on Windows if you encounter installation errors.

Note that the first boot after a full system flash takes significantly longer than usual (often between 5 to 10 minutes) as the OS initializes for the first time. Troubleshooting Common Errors

Infinix Note 30/ Note 30 Pro | How To Unbrick (New Security)